In need of a solution for smoother and more accurate arrow positioning on your Ghost trolling motor? Look no further! Our top cap and arrow replacement is a quick and easy fix that eliminates any...
This durable neoprene cover provides a sleek solution for concealing the external trolling motor cables on your factory trolling motor loom. The size XL sleeve is perfect for accommodating up to ...
Experience the convenience and versatility of the BFE Mega 360 Quick Release Removable Mount. Easily adjust and attach to any major brand trolling motor, allowing for easy removal during travel or ...
This product is specifically designed to prevent the cables on your trolling motor from getting pinched in the mount. It comes with all necessary hardware and is made in the USA.
***Select the ap...
This includes the flat plate and hardware to mount to a Ultrex Quest. This will work with the original Ultrex and the new Ultrex Quest.
***This does NOT include the knuckle. You are able to use yo...
The Ultrex Mega 360 Stabilizer and Support Bracket from BFE. This anodized aluminum bracket comes with a built-in bushing for smooth rotation of the Ultrex. All necessary hardware is included. Comp...
This is a highly efficient Coast Guard Certified LED light that can be used as a substitute for your standard anchor light. It is constructed with durable aluminum and features an anodized black ...
This LED light for anchors is Coast Guard certified and replaces traditional anchor lights. It is constructed from black anodized aluminum and offers a sturdy installation option that can be comp...
Introducing the all new BFE Lowrance Ghost Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Lowrance Ghost trollin...
This is a wedge designed to level your trolling motor. This is critical on some model boats such as Vexus and Triton to get your Mega 360 or Live sonar parallel with the bottom of the lake. Sold in...
Introducing the all new BFE Garmin Force Mega 360 mount. This is an aluminum anodized adapter plate made to work with the Ultrex model Mega 360. The Ultrex model is the perfect length for a 50" or ...
***PLEASE CAREFULLY READ THE NOTES BELOW:
Do you have one of these mounting plates, then this is the correct stabilizer?
If you have a mounting plate with 4 holes where it attaches to the ultrex t...
Tired of your factory plastic knob cracking?? Purchase the BFE replacement knobs made from aluminum and powder coated black. Includes a rubber washer. This is the last knob you will ever need for y...
We designed this 1/4" thick aluminum plate to prevent damage on the deck of your boat caused by your trolling motor bounce buster / stabilizer rod. Made from aluminum and anodized black. Includes 4...
This stabilizer is an adjustable stabilizer made in 2 different lengths to fit a wide variety of pole mounts on the market. These are extremely rugged and will not move in rough water. We offer the...
This easy to use neoprene covers offer an inexpensive way to protect your Active Target transducer while traveling. The cover is designed to work with the transducer on either side of the trolling ...
This is a jackplate bracket designed for a Garmin GT52, GT54, or GT56 transducer. These will also fit a GT34 and GT36. This allows you to mount the transducer to the jackplate without drilling hole...
This is an over the trolling motor pedal mount designed to hold 3 units. This mount is angled towards the bow to offer better clearance over your foot pedal.
The bridge is 6” tall and the top plat...
***This fits a Rite Hite Turret ONLY. This will not fit any other pole mount. There is a 20% restocking fee if you return the stabilizer because it does not fit a different brand/homemade pole moun...
The BFE Jackplate Mount is designed to mount your transducer on the starboard or port side of your jackplate and prevent drilling unnecessary holes in the transom of your boat. The bracket has a pi...
This is an aluminum trolling motor mount designed to install your MDI or MSI transducer on the trolling motor. Includes 2 stainless hose clamps for mounting. All made in America 🇺🇸
This is a switch panel made from marine grade plastic that allows you to easily install a Breaker and Master Power Switch. This can be used for a direct wire Electronics/Boat Harness or it can be u...
This is a direct wire kit that includes the lugs, heat shrink, and TH Marine Hydra connectors to eliminate the plug on your trolling motor. This works with all brand motors.
What's Included:
-TH Ma...
Lowrance Transducer Trolling Motor Mount. This mount works with 80 pound trolling motors and larger on the following models:
***DOES NOT FIT ULTREX QUEST
This mount works with a Active Imaging H...
This American-made, machined plastic cover is designed to fit holes up to 1 1/2 inches and cover any openings used for electronics or trolling motor cables. It is the perfect solution for organiz...
This is an over the trolling motor pedal mount designed to hold 2 units and can be adapted to a triple mount with our BFE Triple Bar. This mount is angled towards the bow to offer better clearance ...
These are made from brass with all stainless nuts and posts. Stamped with positive and negative symbols along with being color coded. Includes one for negative and one for positive. These work on ...
This includes 2 covers for the connectors on the back of your HDS 12 and 16 Live units. There is one cover for the HDMI port and one for the USB port. Lowrance doesn't offer a replacement part for ...
All Measurements are Inside tray measurements. Ratchet Strap and screws (12x1) Included.
Ionic Single Cranking Tray ( 12-5/8" x 6-5/8") - Fits 1 Ionic 100ah or 125ah (***This does not fit a regula...
Includes complete harness to provide direct power to the console and another direct run of power to the bow.
What's Included:
Direct Ancor 8 Gauge to Console
Direct Ancor 8 Gauge to Bow
BFE connec...
This is a heavy gauge aluminum spare prop holder designed to fit inside your compartment or bilge. The base is 6” x 6” and includes all stainless hardware. Made in the USA!
Introducing the all new BFE Minn Kota Fortrex / Maxxum Mega 360 mount. This is a 3 piece mount made from Black Anodized Aluminum that will give your 360 a rock solid mounting option to a Minn Kota ...
BoatEFX Pedal TRAX
Add traction, cooling effect, and style to your trolling motor foot pedal.
Select your trolling motor above.
Compatible with:
Lowrance Ghost
MinnKota Ultrex
Garmin Force
Easy ...
This is a top plate designed to hold 2 units and can retro fit to your current over the pedal mount. The top plate is 3/4” on the bottom and 1 3/4” on the top. Constructed in all 1/4” aluminum and ...
These are neoprene rod sleeves made right here in the USA that will accommodate a rod from 6’6” - 8’. Neoprene doesn’t catch hooks like traditional rod sleeves and allows you to store your rods saf...
These are neoprene rod sleeves made right here in the USA that will accommodate a rod from 6’6” - 8’. Neoprene doesn’t catch hooks like traditional rod sleeves and allows you to store your rods saf...
This is a machined plastic cover that will cover up to a 1 3/4” hole. This is designed to cover any holes used for your electronics or trolling motor cables. Hardware included.
3" x 2" x 3/4"
This is a conversion bar made to mount on our BFE Dual Top Plate and allow two graphs to go side by side. We do not guarantee this will fit other brands without drilling new holes. Constructed in a...
Active Target 2 is compatible with HDS Carbon, HDS Live, HDS Pro, and Elite FS. If you want to run two Active Target 2 transducers then you will need an HDS Pro unit.
This can depend on how you fish. If you fish a lot of smaller lakes and stay on your trolling motor a lot then it can be best to leave it on the motor. If you fish a lot of big water and spot lock frequently throughout the day then a pole mount can be ideal. The ultimate setup is having one on the trolling motor and one on the pole.
This can be decided by how you fish and understanding these are two different technologies. If you fish a lot of shallower water and target structure then 360 is extremely helpful in finding isolated cover. Live sonar can also be used to find cover but finding fish is the main goal with live.
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
